Of plastic extruder maintain key!

1, should find a place for plastic extruder equipment leak position, make sure quantity of heat of electric machinery job wraps around hair, lengthen machine of its life; to should maintain good ground contact.
　　
2, check cutting tool screw on schedule, brand-new machine after using 1 hour, with the tool close solid moves a knife, decide the screw of the knife, strengthen the fixity; between bit and tool carrier to should be added to bearing on schedule pour lubricating oil, make sure the lubricity; between bearing is those who assure cutting tool cut is sharp degree, answer to often check cutting tool, make sure its are sharp degree, decrease to check leather belt to whether slacken on schedule because of the needless attaint; that blade is short of dully and causes other part, seasonable attune is close.
　　
3, start again -- before be being started the 2nd times, ying Xianqing breaks except the rest of unit room place makings, reduce the resistance that start. Should open Qing Dynasty of wheelhouse of inertial cover and leather belt to divide flange on schedule dish does lower part give grey opening, because makings of pink of crusher room eduction enters runner shaft bearing.
　　
4, change component -- change when cutting tool, use knife and the space between calm knife: 0.8MM of 20HP above crusher is beautiful, the crusher 0.5MM under 20HP is beautiful. Reclaim makings is thinner, clearance can be moved appropriately big.


The article arranges Guangdong hardware storage rack wholesale Http://storage-rack.onsonhardware.com/